摘要 : Bio-acrylic acid (AA) is produced from glycerol, a by-product of biodiesel production and oleochemistry. However, conventional purification techniques cannot purify this biobased AA owing to its impurity profile and the significan... 展开 Bio-acrylic acid (AA) is produced from glycerol, a by-product of biodiesel production and oleochemistry. However, conventional purification techniques cannot purify this biobased AA owing to its impurity profile and the significant content of propionic acid (PA). The liquid-solid phase diagram of the binary AA + PA shows that acrylic acid crystallizes as a pure form from melts containing between 50 and 100% (mol/mol) of AA. Thus, a new falling film melt crystallization device has been developed and tested in which: - supercooling is limited by the use of a crystallization surface made of 316L stainless steel, - melt is thermostated, - visual observation of the crystal layer is possible, and - morphology of the crystal layer limits the retention of impure liquid. Purification tests in this falling film device show that AA is separated from the PA in reduced crystallization cycle times and high crystallization yields. 收起