摘要 : To contain high-pressure gases inside a pressure vessel a seal is often made in a thin-walled tube, known as the stem tube, that connects the gas reservoir and the vessel. This seal can be achieved through the use of a resistance ... 展开 To contain high-pressure gases inside a pressure vessel a seal is often made in a thin-walled tube, known as the stem tube, that connects the gas reservoir and the vessel. This seal can be achieved through the use of a resistance pinch weld that forms with only a limited amount of melting occurring. The lack of melting makes applying traditional post-weld nondestructive evaluation (NDE) techniques extremely difficult. The welds of interest here are made from 304L stainless steel (typically 3.8 mm diameter and 38 mm long) and have a non-uniform geometry that does not inherently lend itself to either eddy current or static field SQUID-based measurement techniques. We perform these NDE measurements with both the sample and the SQUID located inside local electromagnetic shielding. SQUID data are presented as individual time series traces for a set of welds that were fabricated using a broad range of fabrication parameters, and a comparison is made between the SQUID-based results and the known parameters. With the limited spatial resolution offered by our present SQUID system, it is not clear if weld quality can be evaluated from purely SQUID-based results. 收起