摘要 : Purpose - In the literature, while designing broadband matching networks, transducer power gain (TPG) is used to measure the transferred power. Generally, in TPG expressions, load and back-end impedances of the matching network ar... 展开 Purpose - In the literature, while designing broadband matching networks, transducer power gain (TPG) is used to measure the transferred power. Generally, in TPG expressions, load and back-end impedances of the matching network are used. This study aims to derive a new quality factor-based TPG expression.Design/methodology/approach - In deriving the new expression, narrowband L type-matching network design approach is used and the new expression in terms of back-end quality factor, load quality factor and output port quality factor is obtained. Then, a broadband-matching network design approach using the derived TPG expression is proposed. Findings - Two broadband double-matching networks are designed by using the proposed design approach using the derived TPG expression. Performances of the designed-matching networks are compared with the performances of the matching networks designed by means of simplified real frequency technique which is a well-known technique in the literature, and it is shown that they are nearly the same. Originality/value - In broadband-matching problems, generally an impedance-based TPG expression is used, and it must be satisfied by the designed broadband-matching networks. But, in the literature, there is no quality factor-based TPG expression that can be used in broadband-matching problems. So, this gap in the literature has been filled by this paper. 收起