摘要 : Polypyrrole/multi-walled carbon nanotube, poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotube and their nanocomposites P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/copper (II) oxide, (CuO) in the initial ... 展开 Polypyrrole/multi-walled carbon nanotube, poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotube and their nanocomposites P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/copper (II) oxide, (CuO) in the initial feed ratio of [EDOT](0)/[Py](0)=1/5 were electrosynthesized on glassy carbon electrode by cyclic voltammetric method. Their characterizations were performed by cyclic voltammetric, Fourier transform infrared-attenuated total reflectance, scanning electron microscopy, energy dispersion X-ray analysis, and electrochemical impedance spectroscopy. To the best of authors' knowledge, the first report on polypyrrole/multi-walled carbon nanotube, PEDOT/multi-walled carbon nanotube, P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/CuO nanocomposite films were comparatively examined in 0.1M NaClO4/CH3CN and in 0.1M sodium dodecyl sulfate solutions. The highest specific capacitance for PEDOT/multi-walled carbon nanotube and polypyrrole/multi-walled carbon nanotube composite films were obtained as C-sp=306 mFxcm(-2) for 3% multi-walled carbon nanotube and C-sp=804 mFxcm(-2) for 1% multi-walled carbon nanotube, respectively. The highest specific capacitances were obtained as C-sp=27.40 mFxcm(-2) and C-sp=26.90 mFxcm(-2) for P(EDOT-co-Py)/multi-walled carbon nanotube includes the wt percent of 1% multi-walled carbon nanotube and P(EDOT-co-Py)/CuO includes the wt percent of 3% CuO, respectively. The C-sp of P(EDOT-co-Py)/CNT composite films were calculated as 9.43 and 11.49 mFxcm(-2) for 3 and 5% multi-walled carbon nanotube, respectively. In addition, The EIS results were simulated with the equivalent circuit model of R-s(C-dl1(R-1(QR(2))))(Cdl2R3). 收起