摘要 : Abstract This paper proposes a new single‐phase direct step‐up ac–ac converter by modifying the p‐type impedance source. It provides a high boost factor as well as high efficiency, while only six parts are required to design it... 展开 Abstract This paper proposes a new single‐phase direct step‐up ac–ac converter by modifying the p‐type impedance source. It provides a high boost factor as well as high efficiency, while only six parts are required to design it, involving just two bidirectional power switches. A safe commutation method has been applied to power switches to make the converter snubber‐free and high efficient. Input and output harmonic filters are no longer required since input and output currents variate continuously with small ripple and low total harmonic distortion (THD). The proposed topology only modulates the output voltage amplitude, not the phase and frequency, so the output frequency is identical to the input frequency and constant. Thus, it can be utilized in step‐up conversion applications, like inductive power transmission from low ac voltage sources. Input and output have the same ground, which is a good protective feature. In this paper, the operating principle of the converter is demonstrated. Experimental results have been represented to evaluate the performance of the converter. For this purpose, an experimental prototype has been fabricated. Results are investigated and compared with other previous step‐up ac–ac converters. Results confirm the theory, operating principle, and performance of the converter. 收起