摘要 : Terrain Observation by Progressive Scans (TOPS) synthetic aperture radar (SAR) and spotlight SAR are advanced SAR imaging modes for wide range swath and high resolution. In order to obtain a wider range coverage, azimuth multichan... 展开 Terrain Observation by Progressive Scans (TOPS) synthetic aperture radar (SAR) and spotlight SAR are advanced SAR imaging modes for wide range swath and high resolution. In order to obtain a wider range coverage, azimuth multichannel is introduced in the literature. Since the azimuth bandwidth of beam steering SAR (BS-SAR; spotlight SAR, sliding spotlight SAR, or TOPS SAR) is much greater than that of a stripmap SAR, a signal reconstruction algorithm used for multichannel stripmap SAR may not be effective for multichannel BS-SAR. In this paper, a multichannel full-aperture azimuth processing algorithm is proposed for a BS-SAR. The key of this algorithm lies in the beam and the azimuth bandwidth compressions of multichannel signals in the Doppler–array and slow time–angle planes, respectively. Through compression processing, the beamwidth and the azimuth bandwidth are smaller than the available angle and equivalent pulse repeating frequency , respectively. Then, an improved post-Doppler STAP method is proposed to recover a 2-D spectrum. With the recovered signal, further processing can be utilized to focus the multichannel signal. Simulation and real data results show the effectiveness of the proposed algorithm. 收起